Billiard Accessories
Cue Extensions
-
Cuetec Duo Smart Extension
Our Price: $99.00
- All-composite ultra-light construction
- Aluminum 3/8 X 14 Quick-Pin
- Gloss black finish
- 3-inch Extension Handle
- 6-inch Extension Handle
- 3-inch and 6-inch combine to create a 9-inch extension
- Replacement “DUO Ready” butt cap (model 95-707 only)
- Nylon slipcase
Add to Cart
-
McDermott Cue Extension
Our Price: $85.00
Fits onto any McDermott cue that uses the 1/2" weight bolt system and is now also available for the H-Series with an Adjustable Balance System
Add to Cart
-
NEW! Carbon Extension to Fit Joss, Viking, Predator, Poison, Players, PureX & Lucasi
Our Price: $15.00
Stackable Extensions
The extension includes Bumper Adapter- Extension is interchangeable between brands
- Extension includes threaded Bumper Adapter
- Additional adapters sold separately
- 2 Inch (2.6 oz) - 4 Inch (2.8 oz) - 8 Inch (3.4 oz) Lengths available
- sturdy lightweight carbon fiber aluminum construction
- Rear extension screws into weight system Under the Bumper
Attn: Lucasi PureX and Players Cues
- Fits past and current models with push-in style bumper.
- Included with a glue-in insert to replace push in bumper
- Adapter is cut to 1/2 inch and will not thread into weight tube.
- Push in bumper will no longer fit after insert is glued in place.
- Weight bolts can no longer be removed/replaced after insert is glued in.
Lucasi Extension with Glue-In Insert Video
Add to Cart
-
Carbon Extension to Fit Meucci
Our Price: $40.00
Stackable Extensions
Extension includes Bumper Adapter - Fits ALL Current BMC & Meucci Models
- Extension includes threaded Bumper Adapter
- 2 Inch (2.6 oz) - 4 Inch (2.8 oz) - 8 Inch (3.4 oz) Lengths available
- sturdy lightweight carbon fiber aluminum construction
- Rear extension screws into the Meucci weight system Under the Bumper
- Coarse thread (5/8 - 11) for Post-1999 models with adjustable weight system
Please Note:
- Not all Meucci cues have a weight system.
- Not all Meucci cues have 1/2 inch of exposed threads (filled with weights) for the adapter to screw into.
- Not all Meucci cues have weight bolts installed, leaving a dirty burred threads in weight tube.
- Not all Meucci cues use this thread, some have a fine thread weight system.
- Not all weight systems are straight and may cause the extension to be off center.
The included 1.5 inch coarse thread bumper adapter screws into the cue's weight system and replaces the existing bumper.
To determine if your cue has the appropriate weight system for this extension, pop off the bumper and check that there is a grey threaded tube just past the bumper.
Add to Cart
-
Predator QR2 - Cue Extension
Our Price: $30.00
Predator QR Extension-2 pairs with any Predator Cue equipped with the Uni-Loc Weight Cartridge System. Once installed the quick-releasing extension adds to the butt length with a single turn of the extension handle. Simply remove your existing rubber bumper, and install the Uni-Loc QR Extension bumper. Now available in 3 Inch (2.65 oz), 8 Inch (4 oz), and 12 Inch (4.45 oz)
Add to Cart
-
Meucci Extension
Our Price: $15.00
Extension includes Bumper Adapter The included 1.5 inch coarse thread bumper adapter screws into the cue's weight system and replaces the existing bumper.
To determine if your cue has the appropriate weight system for this extension, pop off the bumper and check that there is a grey threaded tube just past the bumper.- Fits all current Meucci & BMC cue models
- Extension includes threaded Bumper Adapter
- 4.6 oz
- Painted Glossy Black Maple
- Coarse Thread (5/8 - 11) for all Current Models
Please Note: - Not all Meucci cues have a weight system.
- Not all Meucci cues have 1/2 inch of exposed threads (your cue may be filled with weights) for the adapter to screw into.
- Not all Meucci cues have weight bolts installed, or may have dirty threads in weight tube.
- Not all Meucci cues use this thread, some have a fine thread weight system.
- Not all weight systems are straight and may cause the extension to be off center.
We now have available glue-in coarse thread inserts for Old models
to replace the push-in bumper.There are two sizes of glue in inserts:
- Insert to be used with cues which have a fine thread weight system
- Insert to be used with cues with *No weight tube, such as Meucci Originals, Larry Hubbart, etc.
Add to Cart
-
Meucci Joint Protector Sets
Our Price: $50.00
Listed are Joint Protectors currently available. We are not able to take special orders for specific models. They will be listed here as they become available.
Add to Cart
-
Cuetec Smart Extension
Our Price: $49.00
The Cuetec Smart Extension works exclusively with any Cuetec weight adjustable cue and quickly and easily adds 6-inches to the overall length. Simply unscrew the existing butt cap with the bumper as if adjusting the weight. Screw in the Cuetec Smart Extension. Leave as is or swap back and forth as needed. The extension is useful for making those hard to reach shots without a bridge. Conveniently fits in most cue case accessory pouches.
- Works exclusively with any Cuetec weight adjustable cue
- Adds 6-inches to the overall length
- Useful for making hard to reach shots without a bridge
- Fits in most cue case accessory pouches
- 4.5 ounces
Add to Cart
-
Cuetec Smart Extension
Our Price: $39.99
The Cuetec Smart Extension works exclusively with any Cuetec weight adjustable cue and quickly and easily adds 6-inches to the overall length. Simply unscrew the existing butt cap with the bumper as if adjusting the weight. Screw in the Cuetec Smart Extension. Leave as is or swap back and forth as needed. The extension is useful for making those hard to reach shots without a bridge. Conveniently fits in most cue case accessory pouches.
- Works exclusively with any Cuetec weight adjustable cue
- Adds 6-inches to the overall length
- Useful for making hard to reach shots without a bridge
- Fits in most cue case accessory pouches
Add to Cart
-
Longoni Universal Cue Extension
Our Price: $95.00
This Longoni Universal Extension is 15.5 Inches long. It compresses safely and comfortably around the butt of your cue. The handle feels like the butt of a pool cue in your hand. It helps you get to those hard-to-reach shots. Many players believe this is the best cue extender ever made. It can adjust to fit most cues.
Add to Cart
-
Universal Cue Extender
Our Price: $47.95
Fits on almost any cue. This extension is adjustable, allowing you to extend your cue by 12.5" to 17.5".
Add to Cart
-
Balance Rite™ Forward Weighted Cue Extension
Our Price: $50.09
Add to Cart
-
Riley Smart Cue Extender
Our Price: $21.95
Riley Snooker Cue 9" Extension with Case has Matt black and slick design. Quick release joint to allow fast action when extending the cue. Fits model RIL06 ONLY
Add to Cart
-
Balance Rite™ Rear Cue Extension
Our Price: $59.39
The Balance Cue Extension is the perfect tool for players that need a little extra boost. This expander screws into the base of your cue, bringing even the farthest shot close-in. Tall players get the length they need for a stable, smooth stroke - without having to purchase a bulky extra-long shaft that may not fit in their case. Short players can play with ease regardless of table size - without having to interrupt their game by searching for a bridge. Both players get a solid, great quality extender with the rear-weighted traditional feel they love.
This Extension works with Lucasi Custom, Lucasi Hybrid, Players, Players Pure X, Players Flirt, and Dufferin brand pool cues.Add to Cart
WHY BUY FROM BUDGET BILLIARDS?
Free shipping on all orders over $150 to anywhere in the US.
More custom options than any other web store!
We are the #1 Meucci retailer in the entire world - 2004-2015!
We have a history of great customer service since 2001!
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.